Melissa 646-033 manual Introduction, Safety Measures, Prior To First Use, Using The Food Processor

Models: 646-033

1 20
Download 20 pages 21.01 Kb
Page 10
Image 10
INTRODUCTION

UK

Emme ole vastuussa mahdollisista painovirheistä.

INTRODUCTION

To get the best out of your new food processor, please read through these instructions carefully before using it for the first time. We also recommend that you keep the instructions for future reference, so that you can remind yourself of the functions of your food processor.

SAFETY MEASURES

Normal use of the food processor

Incorrect use of the food processor may cause personal injury and damage to the appliance.

Use the food processor for its intended purpose only. The manufacturer is not responsible for any damage resulting from incorrect use or handling (see also Guarantee Terms).

The food processor may only be connected to 230 V, 50 Hz.

The base of the food processor or cord must not be submerged in water or any other liquid.

Do not operate with wet or damp hands. Make sure that no liquid gets into the motor section.

Never leave the food processor unattended when in use and keep an eye on children.

The blade and grating/slicing disc must be handled with caution, as these parts are extremely sharp. Always remove the blade before emptying the mixing bowl.

Do not leave the food processor running for more than 1 minute at a time. If the food processor has been running for 1 minute, you should leave it to cool down before you use it again.

Do not use the food processor if the bowl or jug is empty.

This food processor is not suitable for commercial or outdoor use.

NEVER use your fingers, kitchen utensils or similar to push ingredients down the feed tube! Use the accompanying pusher.

Do not remove any accessories until the food processor has stopped completely.

Do not use the blade and the grating/slicing disc at the same time in the mixing bowl.

Do not use the blender and the mixing bowl at the same time.

Where to put the food processor

Always place the food processor at the back of the kitchen counter.

Do not place the food processor next to hot areas, for example gas rings and electric hotplates.

Do not allow the cord to hang over the edge of a table/counter, and keep it away from hot objects and naked flames.

Cord, plug and mains socket

Ensure that the cord is fully extended.

Check regularly that the cord and plug are not damaged and do not use the food processor if there is any damage, or if it has been dropped or damaged in any other way.

If the food processor, cord or plug is damaged, the food processor must be inspected and, if necessary, repaired by an authorised repair engineer, otherwise there is a risk of electric shock. Never try to repair the appliance yourself.

Unplug the food processor before changing accessories, taking the lid off the bowl or cleaning, and when the food processor is not in use.

Avoid pulling the cord when removing the plug from the

socket. Instead, hold the plug.

Check that it is not possible to pull or trip over the food processor cord or any extension cord.

KEY

1.Release button

2.Blender

3.Blender lid

4.Cap

5.Safety cover

6.Blender shaft

7.Mixing bowl shaft

8.Base

9.On/off button

10.Spatula

11.Accessories shaft

12.Plastic cover for blade

13.Blade

14.Pusher

15.Grating/slicing disc

16.Mixing bowl lid

17.Mixing bowl

PRIOR TO FIRST USE

Place the base (8) on a flat surface, e.g. a kitchen counter, and make sure it is standing firmly on the four suckers underneath. Before using the food processor for the first time, or after prolonged storage without use, wash any parts that will come into contact with food.

USING THE FOOD PROCESSOR

Fit the required accessories, and place the ingredients into the food processor as described below.

Start the food processor by turning the on/off button (9) to position 1 or 2 and switch it off by turning it back to position 0.

To use the food processor for brief food preparation, turn the on/off button to position P (pulse function). The food processor will run at top speed as long as you hold the button down in that position, and will stop when you release the button, which then automatically reverts to position 0.

When using the blender (2) or blade (13), you should stop the food processor at regular intervals and check whether the food has been adequately blended/chopped.

10

Page 10
Image 10
Melissa 646-033 manual Introduction, Safety Measures, Prior To First Use, Using The Food Processor