USING THE BLENDER
General operation
•Fit the blender jug (4) or coffee/spice mill (9), and put the ingredients to be blended in it as described below.
•Start the blender by turning the on/off button (8) to position “1” or “2” and switch it off by turning it back to position “0”.
•To use the blender in short bursts, turn the on/off button to position “Pulse”. The blender will run at top speed as long as you hold the button down in that position, and will stop when you release the button, which then automatically reverts to position “0”.
•You should stop the blender at regular intervals to check whether the ingredients have been sufficiently blended/chopped.
Using the blender jug
Attach the blender jug to the blender shaft (6) with the handle facing away from you and to the left, and turn it clockwise until it locks into place.
1.Attach the blender jug to the blender shaft (6) with the handle facing away from you and to the left, and turn I clockwise until it locks into place.
2.Place the food in the blender jug.
3.Fit the jug lid (3) by placing it over the blender with the pin to the right of the handle and turning the lid clockwise until it locks into place.
4.Fit the filler cap (2) by inserting it into the hole in the lid so the pins on the cap fit into the grooves in the lid. Turn the cap clockwise until it locks into place.
5.Start the blender.
6.Use the filler cap to add more ingredients during blending, if necessary. In that case, stop the blender before removing the cap to avoid splashes.
7.Remove the filler cap, the jug lid and the blender jug in reverse order. Hold the release button (1) down while twisting off the lid.
Important! If the blender is to be used to chop different types of food (e.g. raw meat followed by vegetables, or egg followed by fruit), you must wash the parts that come into contact with food between each type of food.
Using the coffee/spice mill
The coffee/spice mill is ideal for grinding coffee beans and various spices.
1.Attach the mill to the blender shaft and turn it anticlockwise until it locks into place.
2.Place the items to be ground in the mill.
3.Fit the mill lid (10) by placing it on the mill and turning it anticlockwise until it locks into place.
4.Start the blender.
5.Remove the mill lid and the mill in reverse order.
Storage
Ensure that the blender is clean and dry before storing.
CLEANING
•Before cleaning, remove the plug from the wall socket.
•The best way to clean the base of the blender is to wipe it with a
•The blender jug, the coffee/spice mill, the two lids and the filler cap can be washed in the usual way.
•Do not use any kind of strong or abrasive cleaning agent on the blender parts. Never use a scouring sponge or similar to clean the blender, as the surface may be damaged.
INFORMATION ON DISPOSAL AND RECYCLING OF THIS PRODUCT
Please note that this Adexi product is marked with
this symbol:
This means that this product must not be disposed of together with ordinary household waste, as electrical and electronic waste must be disposed of separately.
In accordance with the WEEE directive, every member state must ensure correct collection, recovery, handling and recycling of electrical and electronic waste. Private households in the EU can take used equipment to special recycling stations free of charge. In certain member states, used appliances can be returned to the dealer where they were bought on the condition you buy new products. Contact your retailer, distributor or the municipal authorities for further information on what you should do with electrical and electronic waste.
GUARANTEE TERMS
The guarantee does not apply:
•if the above instructions are not followed
•if the appliance has been interfered with
•if the appliance has been mishandled, subjected to rough treatment, or has suffered any other form of damage
•if faults have arisen as a result of faults in your electricity supply.
Due to the constant development of our products in terms of function and design, we reserve the right to make changes to the product without prior warning.
IMPORTER
Adexi Group
We cannot be held responsible for any printing errors.
11
