FILTERS
The motor filter is a HEPA filter placed inside the dust compartment.
Open the dust compartment and gently pull the filter free of the holders. The filter should be cleaned with the supplied brush and pin (This is placed in the drawer at the bottom of the vacuum cleaner). The pin is being used for cleaning between the grooves.
This filter may be washed in lukewarm water without use of any chemicals. None of the filters can be washed in a washing machine or a dishwashers.
WHEN THE CONTAINER HAS BEEN EMPTIED AND IS PUT BACK INTO THE VACUUM CLEANER AGAIN, YOU CAN HEAR IT SNAP BACK INTO POSITION. ONLY THEN WILL IT BE READY FOR USE.
REPLACING THE MICROFILTER
The micro filter is the filter placed on the side of the vacuum cleaner:
Press the
Insert the exhaust grating back in place.
EXTRA FEATURES
The cleaner has two wheels at the rear and a
When the floor nozzle is in use, it may be necessary to adjust the suction pover with the electronic suction power regulator. This is done at the top of the vacuum cleaner and is useful when cleaning curtains, furniture, carpets or hard floors.
MAINTENANCE
Pull out the plug and if necessary clean the appliance on the outside with a damp cloth.
Never immerse the appliance into water and other liquids!
17