USING THE TIMER FUNCTION
•The clock must be set (see section “Setting the clock”) to allow you to use the timer function.
•Fill the coffee maker with the required amount of water and coffee/tea, as described in the “Use” section. Place the glass pot on the hotplate.
•Hold the TIMER button on the control panel in, and set the time the coffee maker is to start by pressing the HOUR and MIN buttons (as described in the section entitled “Setting the clock”).
•Release the TIMER button once the time has been set and press the on/off button once. The AUTO indicator light shows green. The display shows “AUTO”.
•If you want to view the time that has been set, hold the TIMER button in. The time set and the word TIMER will be shown in the display until you release the button again.
•Once the programmed time is reached, the AUTO indicator light will go out. The coffee maker will start, and the red ON light will come on.
•The coffee maker switches off automatically approximately 2 hours after brewing is complete.
CLEANING
•Before cleaning, remove the plug from the wall socket and allow the coffee maker to cool down.
•The filter funnel and glass pot can be washed using normal
•The best way to clean the coffee maker itself is to wipe it with a damp cloth using hot water and a little
•Do not use any kind of strong or abrasive cleaning agent on the coffee maker or accessories. Never use a scouring sponge or similar to clean the coffee maker, as the surface may be damaged.
DESCALING
The lime content of ordinary tap water means limescale may gradually be deposited inside the coffee maker. This limescale may be loosened using acetic acid (NOT ordinary vinegar) or descaler, available in supermarkets etc.
1.Mix 100 ml acetic acid with 300 ml cold water, or follow the instructions on the descaler packaging.
2.Pour the solution into the reservoir and switch on the coffee maker using the on/off button.
3.Allow half of the solution to run through the coffee maker, and then switch it off using the on/off button.
4.Leave it switched off for around 10 minutes, and then switch it on again, and allow the rest of the solution to run right through.
5.To remove the final residues of limescale and acetic acid, pour a potful of cold water into the water reservoir, switch the coffee maker on and allow the water to pass through it.
6.Pass fresh water through the machine 3 times (as described in point 5). The coffee maker is now ready for use again.
16
