UK
INTRODUCTION
To get the best out of your new appliance, please read this user guide carefully before using it for the first time. Take particular note of the safety precautions. We also recommend that you keep the instructions for future reference, so that you can remind yourself of the functions of your appliance.
SAFETY MEASURES
Normal use of the appliance
•Incorrect use of this appliance may cause personal injury and damage to the appliance.
•Use for its intended purpose only. The manufacturer is not responsible for any injury or damage resulting from incorrect use or handling (see also Guarantee Terms).
•For connection to 230 V, 50 Hz only.
•The kettle may only be used with the base station supplied.
•For domestic use only. Not for outdoor or commercial use.
•Remove the plug from the socket once you have finished using the appliance.
•Please note that the appliance will remain hot for a while after you switch it off. Always allow it to cool completely before you put it away or clean it.
•Do not submerge in water or any other liquid.
•Do not switch the appliance on unless there is water in it.
•Water level must always be between "MIN" and "MAX". Check water level using the internal water level indicator.
•Never leave unattended when in use, and keep an eye on children.
•Avoid touching the outside of the kettle when in use, as it becomes hot. Touch the handle and lid only. Be careful of hot steam when opening the lid.
•Never touch the appliance or base station if your hands are wet or damp.
Positioning the appliance
•Always place the appliance on a level, dry, stable and
•Always place the appliance at the back of a kitchen counter and at a safe distance from flammable objects such as curtains, tablecloths or similar.
•The appliance must not be placed or stored near other sources of heat.
•Do not cover.
Cord, plug and mains socket
•Check regularly that neither the cord nor plug is damaged and do not use if there is any damage, or if it has been dropped on the floor, dropped in water or damaged in any other way.
•If the appliance or plug is damaged, it must be inspected and if necessary, repaired by an authorised repair engineer, otherwise there is a risk of electric shock. Never try to repair the appliance yourself.
•Remove the plug from the socket when cleaning, or when the device is not in use. Avoid pulling the cord when removing the plug from the socket. Instead, hold the plug.
•Do not allow the cord to hang over the edge of a table/counter, and keep it away from hot objects and naked flames.
•Check that it is not possible to pull or trip over the cord or any extension cord.
•Do not wind the cord around the appliance.
•Check the cord in the base fits into one of the small incisions in the edge to ensure the base station is stable, and not standing on the wire.
KEY TO MAIN COMPONENTS OF THE APPLIANCE
1.Incision for cord
2.Stud
3.Lid
4.Opening button
5.Indicator light
6.On/Off button
7.Handle
8.Spout
9.Power cord with plug
10.Base
