2
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and
injury to persons, including the following:
Read all instructions before using appliance.
Do not touch hot surfaces. Use handles or knobs.
Do not immerse cord, plug or coffeemaker unit in water or other
liquid. See instructions for cleaning.
This appliance is not for use by children.
Close supervision is necessary when any appliance is used near
children.
Unplug from outlet when not in use. Unplug and allow to cool before
attaching or removing parts and before cleaning the appliance.
To disconnect, switch OFF, then remove plug from power supply.
Do not let cord hang over edge of table or counter or touch hot
surfaces.
Do not place on or near a hot gas or electric burner or in a heated
oven.
Only use appliance as indicated in these instructions.
• Carafe must never be used on a range top. Use only the
designated carafe for your coffeemaker.
Do not use a carafe having a loose or weakened handle or a
cracked carafe.
Do not remove filter basket or lids during brewing cycle, scalding
may occur.
Allow filter basket to cool before removing it from coffeemaker.
Do not pour liquid other than water and the cleaning solution
specified in this manual into the water chamber (see instructions
for cleaning).
Do not move entire unit when carafe contains hot liquid.
Do not operate any damaged appliance. Do not operate with a
damaged cord or plug, or after the appliance malfunctions or has
been dropped or damaged in any manner. Return appliance to
the nearest authorized service center for examination, repair,
electrical or mechanical adjustment.
Use attachments only if recommended by manufacturer.
Be certain lids are securely in place before operating appliance.
Do not use outdoors or while standing in a damp area.
Coffeemaker must be left to cool down for approximately 10 minutes
before adding more water.
• WARNING: Do not remove bottom cover. No user serviceable
parts inside. Repair must be done by authorized service personnel
only.