Cleaning & Descaling 1.Cleaning
-Remove the power plug and cool the kettle down;
-Scrub the outside and the base lid of the kettle with a damp cloth, then a dry one instead. Please do not use rough things or else that’ll scrape the kettle;
2.Descaling
Note:
•If the kettle is switched on when empty or with insufficient water, then the kettle will switch off automatically to protect against dry boiling. Wait until the heating element cools down, refill with tap water and use as normal. This protection function is not designed for regular use, as it will shorten the life of the kettle.
•If the kettle is overfilled, boiling water may be ejected.
•The kettle is only to be used with the stand provided.
•The appliance must not be immersed during cleaning.
•If the supply cord is damaged, the manufacturer or its service agent or a similarly qualified person must replace it in order to avoid a hazard.
Descaling
Always ensure that the kettle is disconnected from the mains before descaling. Scaling or furring is a common problem in hard water areas. It is recommended that a propriety descaler is used whenever scale deposits build up. The instructions supplied with the descaler must always be followed. Scale build up may result in the kettle switching off before boiling. Using a water purifier will help to reduce scale
Ensure that you descale your filter at regular intervals to avoid impairing the pouring performance of your kettle.
Disposal and the Environment
If your electrical appliance requires replacement or is of no further use, please think of protecting the environment. Contact you local authority for advice as many have facilities for environmentally safe disposal.
PRODUCT SPECIFICATION : Voltage: 220V – 240 V~50/60 Hz Power:
Water capacity: Minimum 0.5L – Maximum 1.7L