minutes at any one time. Allow appliance to cool down for one hour before subsequent use.
-Do not use the appliance with frozen foods or food containing bones.
-Exercise extreme caution during the assembly and disassembly of the cutting blade as the teeth are extremely sharp and could cause serious harm.
-This appliance must be used with the sliding feed table and the piece holder in position unless this is not possible due to the size or shape of the food.
-Any misuse or failure to follow the instructions for use renders the guarantee and the manufacturer’s liability null and void.
Instructions for use:
-Insert the plug into the wall socket.
-Place the food item on the lower support platform and attach the food pusher to the platform, which will hold the food item in place (Fig. 1).
-Adjust the thickness of the slice using the thickness control dial (Fig. 2).
-Switch the appliance on using the on/off button.
-Using the food pusher slide the food item towards the blade (Fig. 1).
Once you have finished using the appliance:
-Switch off the appliance.
-Remove the plug from the wall socket.
-Clean the appliance.
Cleaning
-Disconnect the appliance from the wall socket and allow it to cool down before undertaking any cleaning task.
-Clean the components using dish washing liquid and a damp cloth. Make sure all components are dry afterwards.
-Do not use solvents, or products with an acid or base pH such as bleach, or abrasive products, for cleaning the appliance.
-Do not submerge the appliance in water or any other liquid, or place it under a running tap.
-During the cleaning process, take special care with the cutting blade as the teeth are very sharp.
-It is advisable to clean the appliance regularly and
remove any food remains.
-If the appliance is not clean, its surface may degrade and reduce the lifespan of the appliance and become unsafe to use.
The following components may be washed in a dishwasher:
-Food pusher (may only be placed in the top section of the dishwasher)
-Lower support platform
-Cutting blade
To disassemble the blade:
-The cutting blade can be removed for cleaning. To do so, use a Phillip/Star screwdriver to loosen the three screws on the blade and take off the blade carefully. After cleaning, reattach the cutting blade with the same three screws.
Anomalies and repair
-Take the appliance to an authorised technical support service agent if any problems arise. Do not try to dismantle or repair the appliance, as this may be dangerous.
-If the connection to the plug or cord has been damaged, it must be replaced and you should proceed as you would in the case of damage.
Ecology and recyclability of the product
-The appliances’ packaging materials are included in a collection, classification and recycling system. Should you wish to dispose of them, use the appropriate public containers for each type of material.
-The product does not contain concentrations of substances that could be considered harmful to the environment.
-Should you wish to dispose of the product once its’ working life has ended, take it to an authorised waste agent for electric and electronic appliances.
26601 IM.indd 4
2011/11/15 03:16:28 PM
