4.Set the thermostat control knob to its ‘Max.’ position. The indicator light will turn on, and the heating element is permanently switched on.
5.After approximately
6.The grill can also be used to keep the food warm: by turning the thermostat control knob back to a lower position, the intervals between the heating element switching on and off can be reduced to a minimum.
7.The water in the grill pan will evaporate during use. So you must to fill up water from time to time. Be careful not to pour water on the heating element.
8.When grilling is finished, turn the thermostat to “0” (off position) and disconnect the grill from the mains supply socket.
General care and cleaning
Ensure that the grill is thoroughly cleaned after use.
Before cleaning your barbecue, always make sure that the plug has been disconnected from the mains supply socket. Allow the grill to cool down thoroughly before cleaning.
Then you should remove the heating element and control box from the grill pan. Never switch the heating element on when it is not placed onto the appliance.
Clean the heating element with a clean and dry cloth only.
Clean the grill rack and the grill pan with warm soapy water and dry afterwards.
Don’t use any harsh abrasive cleaners or a metal sponge to clean the grill rack and the grill pan.
Storage
After cleaning, the grill should be stored indoors in a dry location.
Note:
This appliance is not intended for use by persons (including children)with reduced physical, sen- sory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of
the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
The temperature of accessible surfaces may be high when the appliance is operating.
The instructions shall state that appliances are not intended to be operated by means of an external timer or separate
MW_27010_IM.indd 5
6/4/2010 1:30:37 PM
