INSTRUCTIONS FOR USE:
USING YOUR KETTLE
It is important that you read these instructions before using your kettle for the first time.
1.Open the lid of the kettle, fill with tap water to the desired level. (Min. capacity is 0.5L and max. capacity is 1.0L). In hard water areas, using purified or filtered water is recommended to reduce the amount of scale build up in the kettle. (Note: You may also fill through the spout, but be careful not to overfill – use water level gauge to check)
2.Close the lid until it clips. Place the kettle on the base and plug into the mains.
3.To switch on the kettle, press the On/Off switch forward (position 1) (CAUTION: Do not place downward pressure on the switch). When the water has boiled the kettle will automatically switch off. You can stop the kettle at any time by pressing the On/Off switch backwards (position 0).
4.Pour slowly and carefully. If you wish to
Warning:
If the kettle has just boiled it will be full of steam that will escape if the lid is opened.
IMPORTANT: Do not open the lid when steam is coming out of the spout.
Before pouring or filling always remember to disconnect from electricity.
Note:
If the kettle is switched on when empty or with insufficient water, then the kettle will switch off automatically to protect against dry boiling. Wait ±15minutes until the heating element cools down, refill with tap water and use as normal. This protection function is not designed for regular use, as it will shorten the life of the element.
If the kettle is overfilled, boiling water may be ejected. The kettle is only to be used with the stand provided (cordless models only).
The appliance must not be immersed in liquid during cleaning.
If the supply cord is damaged, the manufacturer or its service agent or a similarly qualified person must replace it in order to avoid a hazard.
Cleaning and Maintenance
DESCALING
Always ensure that the kettle is disconnected from the mains before descaling. Scaling or furring is a common problem in hard water areas.
1)Fill the kettle to MAX position and boil the water. Remove the kettle from the power socket and the base unit and place it in an empty sink or bowl.
2)Add 50 grams of Citric Acid (Available from Chemists) or other descaler products (available at supermarkets) to the water or as directed.
3)Leave it to stand for approximately 5 minutes or until the effervescence subsides, and then empty
the water. Rinse thoroughly, and wipe the outside of the kettle with a soft damp cloth.
4)Ensure the kettle and electrical connections are completely dry before using the kettle.
Ensure that you descale your filter at regular intervals to avoid impairing the pouring performance of your kettle.
•Always disconnect the plug from the mains before cleaning the kettle and base. Wipe the kettle and base with a moist cloth. Never use an aggressive scourer, steel wool of strong chemical cleaners.
•Descale the kettle regularly. This will depend on the hardness of the water and the frequency of use. Scale build up will significantly reduce the heating efficiency of the kettle.
•Use of a proprietary descaler for kettles is recommended. Follow the instructions provided carefully.
Disposal and the Environment
If your electrical appliance requires replacement or is of no further use, please think of protecting the environment. Contact you local authority for advice as many have facilities for environmentally safe disposal
