TIPS:
•Always place the appliance on a stable surface and keep away from all flammable materi- als.
•Ensure that the appliance is not used on or near any other heat source.
•Before you use the appliance it must be filled with the required amount of oil or fat. Never use the appliance without oil or fat because this will damage the heating element.
•Never move the appliance during use. The oil temperature reaches severe heat levels and could cause serious injury. Wait for the oil & appliance to cool down completely before you move the appliance.
•This appliance is protected with a thermal safety device, which switches the heating ele- ment off automatically if it overheats. To reset the appliance, remove the plug from the wall socket and allow the heating element to cool down completely. Press the reset button on the reverse side of the heating element assembly. Then insert the plug into the wall socket and switch on the appliance.
•Never immerse the heating element assembly in water.
•Never leave the appliance unattended while in use. Ensure that children remain as far away as possible from the appliance during use.
•If the appliance or power cord is damaged, return the appliance to the nearest authorised service centre for repair.
•Do not try to repair the appliance or to replace a damaged power cord. Any attempt to dismantle or repair the appliance renders the warranty and the manufacturer’s liability null and void.
•Be sure not to damage the heating element.
•Before switching on the fryer, ensure that the element assembly is correctly and securely mounted in the slots on the stainless steel body. If the safety switch is not engaged, the heating element will not switch on.
OVERHEAT PROTECTION:
•If you should accidentally switch on your deep fryer when there is no oil or fat in it then the overheat protection will automatically turn on. The appliance will not be usable and needs to be unplugged.
•Only after the device has been left to cool down completely should the “RESET” button on the rear of the heating element assembly be pressed for the appliance to work again.
Reset button shown at the rear of the heating element assembly.
TECHNICAL DATA:
Operating voltage:
Power: 2000W
MW27103 Deep Fryer_IM.indd 6
2012/05/28 09:15:11 AM
