PARTS IDENTIFICATION
A
B
C
D
E
F
A.Plastic handle B.Thermostat C.Power switch D.Fins
E.Power cable & plug storage compartment F.Castor wheels
INSTRUCTION
The oil filled radiator is manufactured to the highest specifications, utilizing the latest tech- nology. To get the best from this product and prolong it’s life, please spare a few minutes to read the user instructions.
FEATURES
Large
Automatic temperature controller for adjusting and maintaining the desired room temperature. Special
for ease of movement.
Safety Guidelines
1.The radiator should always be kept upright
2.Don’t position your radiator near to flam- mable materials. Allow a distance of at least 50mm between furniture, curtain, walls and any other household objects.
3.Don’t position your radiator directly under a socket outlet.
4.If the cord becomes worn, it must be re- placed by a qualified technician.
5.Don’t lay the cords over the radiator when not in use.
6.Don’t cover the radiator with anything.
7.The radiator must not be used in a bath- room or near a source of water.
8.It’s normal for the radiator to make a noise when it is being used for the first time.
9.In case of problems with the radiator, please don’t attempt any repairs. Refer repairs only to qualified service personnel.
10.The oil used in this radiator is of a specifi- cation particular to this type of radiator and is manufactured with a precisely measured quantity. Only approved agents must open the oil container section to carry our re- pairs. Any oil leak must be reported to and repaired by qualified service personnel.
11.Check that your supply voltage is the same as the shown on the rating label and that the socket is earthed.
Fitting the wheels (see Diagram (a) & (b) for guidance)
1.Turn the radiator upside down and rest on a soft surface to prevent scratching the radia- tor housing.
2.Screw the wheel plate onto the radiator, us- ing the wire loops and wing nuts provided.
3.Push the castor wheels onto the wheel pins on the plate until they “click” into place.
4.Turn the radiator back to its correct upright position.
Operation:
1.Turn the thermostat (B) to the highest set- ting and switch on the power button (C). When the desired temperature has been reached, turn back the thermostat until the indicator lamp goes out.
2.Simply adjust the thermostat to retain the desired temperature.
3.The indicator lamp indicates whether or not the radiator is working.
Warning
1.This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruc- tion concerning use of the appliance by a
_IM.indd 2
12/3/2013 11:58:36 AM
