OPERATION OF YOUR HEATER:
•NEVER COVER THE HEATER
1.Remove the heater from all packaging and place it in a desired location.
2.Ensure that there is a safe area between the heater and furniture, curtains etc.
-50cm safe area top and sides
-120cm safe area in front
3.Unwind the power cord and plug it into the power outlet.
4.To activate the heater, turn the knob clockwise to the “*” position for cool air.
-I is for low power
-II is for maximum power
AUTO SAFETY SHUT-OFF:
•The heater has a
•To reset the heater, follow these steps;
1.Turn the control setting to the “O” position.
2.Unplug the heater and wait
3.After the unit has cooled down, plug it in and operate normally.
4.Turn the selector switch into desired position (Fan, Low or High).
5.Turn the thermostat switch to the desired temperature position.
6.When you feel the room temperature is sufficient, turn the thermostat
7.The thermostat switch will keep the desired room temperature automatically.
8.You can also turn the thermostat switch
CLEANING AND MAINTENANCE:
•DO NOT IMMERSE IN WATER OR ANY LIQUID
•Be sure to switch off the power supply and remove the plug from the power outlet before cleaning.
•Wait for the heater to cool down sufficiently.
•Clean the body of the heater with a damp cloth. DO NOT ALLOW WATER INTO THE APPLIANCE.
•DO NOT use soap or chemicals which may damage the housing of the heater.
•Allow sufficient drying time before operating again.
•Clean the air inlets and outlets regularly with a vacuum cleaner.
•When the unit is not in use, we recommend that the heater is repacked into it’s original packaging and stored in a cool, dry place.
