INSTRUCTIONS FOR USE: | 1. | Flip Top Lid |
| ||
| 2. | Lid Trigger |
1 | 3. | Handle |
| 4. | On/Off Switch |
| 5. | Stand/Base |
8 | 6. | Water Level Indicator |
| 7. | Body |
| 8. | Spout |
|
| 2 |
6
3
4
7
5
HOW TO OPERATE YOUR KETTLE
It is important that you read these instructions before using your kettle for the first time.
1.Open the lid of the kettle by pulling the lid trigger, fill with tap water to the desired level. (Min. capacity is 0.5L and max. capacity is 1.0L). In hard water areas, using purified or filtered water is recommended to reduce the amount of scale build up in the kettle.
2.Close the lid by releasing the lid trigger. Place the kettle on the base and plug into the mains.
3.To switch on the kettle, press the On/Off switch up (position 1). The power indicator light will now be on. When the water has boiled the kettle will automatically switch off. You can stop the kettle at any time by pressing the On/Off switch down (position 0).
4.Pour slowly and carefully. If you wish to
WARNING: If the kettle has just boiled it will be full of steam that will escape if the lid is opened.
IMPORTANT: Do not open the lid when steam
is coming out of the spout. Before pouring or filling always remember to disconnect from electricity.
Note: If the kettle is switched on when empty or with insufficient water, then the kettle will switch off automatically to protect against dry boiling. Wait until the heating element cools down, refill with tap water and use as normal. This protection function is not designed for regular use, as it will shorten the life of the kettle.
If the kettle is overfilled, boiling water may be ejected.
The kettle is only to be used with the stand/base provided.
The appliance must not be immersed during cleaning.
If the supply cord is damaged, the manufacturer or its service agent or a similarly qualified person must replace it in order to avoid a hazard.
