•Always unplug the heater when not in use.
•Do not operate any heater with a damaged cord or plug, or after the heater malfunctions, has been dropped or is damaged in any manner. Return the heater to an authorized service facility for examination.
•Do not use the heaters outdoors.
•This heater is not intended for use in bathrooms, laundry areas or similar moist indoor locations. Never locate the heater where it may fall into a bathtub or other water containers.
•Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
•Do not run the power cord under carpeting or cover the cord with throw rugs, runners or the like. Arrange the cord away from traffic areas and where it will not be tripped over.
•Do not place the cord over any part of the heater.
•Do not plug this heater into an extension lead, double adapter or power board.
•Do not operate unless the cord is fully unreeled.
•Do not attempt to repair, disassemble or modify the appliance. There are no
•To disconnect the heater, set controls to OFF then remove the plug from the outlet.
•To prevent a possible fire, do not block air intakes or exhausts in any manner.
•Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock, fire or could damage the heater.
•This heater has hot electrical parts inside. DO NOT use it in areas where gasoline, paint or flammable liquids are used or stored.
•Use the heater only as described in this booklet.
Any other use is not recommended by the manufacturer which may cause fire, electric shock or injury to persons.
•Fully remove the power cord from the cord storage before use. Always uncoil the power cord before applying power.
•This product must always be used AND STORED in the upright position.
Warning: in order to avoid overheating, do not cover the heater.
COMPULSORY WARNING
If the supply cord is damaged, the cord must be replaced by the manufacturer. This Column Heater is filled with a precise quantity of oil. Repairs requiring the opening of the oil container are only to be conducted by the manufacturer or a qualified authorized service agent who should be contacted if there is an oil leakage.
Disposal of the oil should be in accordance with local regulations. You should contact your local council to determine the correct procedure.
This product has not been designed for any uses other than those specified in this booklet.
SAVE THESE INSTRUCTIONS
YOUR HEATER COLUMN
Before first using your new appliance, it is most important that you read and follow the instruction in this use and care booklet, even if you feel you are quite familiar with this type of appliance.
Your attention is drawn particularly to the section dealing with “IMPORTANT SAFEGUARDS”. Find a place and keep this booklet handy for future reference.
Your Column Heater is easy and safe to use. It has been designed to function quietly and safely under normal circumstances. Read all instructions to ensure safe and efficient use.
HEATING
The columns or fins are filled with a special oil that conducts heat to the metal surfaces. These in turn warm the air around them which gently and silently heats the room. Be careful because they work under pressure as the oil inside heats up. Like any electrical appliance, this product may cause injury or damage property if used whilst damaged.
MOUNTING THE FEET
1.Place the column heater
2.First snap the cord holder onto the front foot. (Note: the oval concave should be upwards.)
3.Snap the front foot onto the front cover and then use two short screws provided to fix the front foot in place.
4.Snap the back foot onto the back cover and then use two long screws provided to fix the back foot into place.
NOTE: After wheels assembled as to above, take the unit in upright position, if you find unit is not stable on the ground, you can adjust the two screws on back wheels.
WARNING:
Do not operate without feet attached. Operate the heater only in an upright position (feet on the bottom, controls on the top), any other position could create a hazardous situation.
NOTE: After attaching the feet wait at least 15 minutes for the oil in each fin to setting before using the column heater.
