Mellerware ICM001A Safety Advice, Operating Procedures & Maintenance Unpacking Your ICE Maker

Models: ICM001A

1 6
Download 6 pages 36.14 Kb
Page 3
Image 3

PREPARING YOUR ICE MAKER FOR USE When using electrical appliances, basic safety precautions should be followed to reduce the risk of fire, electric shock, and injury to persons or property. Read all instructions before using any appliance.

SAFETY ADVICE:

-Do not operate this appliance with a damaged power cord. If the power cord is damaged,

it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

-Ensure that the voltage on the rating label corresponds with the voltage of the wall socket. No other appliance should be plugged into the same wall socket when using this appliance. Ensure that the plug is fully inserted into the wall.

-Do not allow the power cord to come into contact with hot, rough or sharp surfaces and objects.

-Do not allow the power cord to hang over the edge of the counter.

-Do not use this appliance with plug adaptors and extension cords.

-Switch off the appliance & remove the plug from the wall socket before undertaking any cleaning task or when the appliance is not in use.

-This appliance is intended for household use only. Do not use the appliance outdoors.

-Do not place this product in direct sunlight.

-Ensure that there is a 10cm gap between the unit and surrounding objects.

-Do not use any other liquids to make ice-cubes other than clean water.

-Do not clean your ice maker with flammable

or hazardous fluids. The fumes can create a fire hazard or an explosion and could be hazardous to your health.

-Do not tilt or turn the appliance over. This appliance should remain upright at all times.

-This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance and are supervised during use of the appliance by a person responsible for their safety.

-Children should be supervised to ensure that they do not play with the appliance.

-Use the appliance in a well ventilated area.

-Do not place the appliance on hot surfaces, such as cooking plates, gas burners, ovens or similar.

CAUTION: In order to prevent overheating do not cover the appliance.

-Do not use the appliance if it has fallen on the floor, if there are visible signs of damage or if it has a leak.

-Do not pull on the power cord to remove the plug from the wall socket. Do not use the power cord to lift, pull or carry the appliance.

-Always use the appliance on an even surface.

-Do not touch the plug, power cord or appliance with wet hands.

-Do not submerge the plug, power cord or appliance in water or any other liquid.

-Only use this appliance for its intended purpose.

-Only use the accessories provided with this appliance. Using other accessories can cause the appliance to malfunction.

-Do not touch the evaporator while the appliance is in use.

OPERATING PROCEDURES & MAINTENANCE UNPACKING YOUR ICE MAKER:

1.Remove the exterior and interior packaging. Check if ice basket and ice scoop are inside. If any parts are missing, please contact our customer service department.

2.Remove the tape securing the ice shovel, ice basket & ice scoop in place. Clean the tank & ice basket.

3.Put the ice maker on a level counter top away from direct sunlight or any other sources of heat.

4.Ensure that the unit has a 10cm space on all sides from surrounding objects.

5.Allow the water to circulate through the product until it indicates “ADD WATER”.

6.Empty all water and refill the product with fresh clean water.

7.Only use cold water when using this product.

8.To get larger, more dense ice bullets, use

MW_ICM001A_IM.indd 3

31/08/2011 08:29:20

Page 3
Image 3
Mellerware ICM001A specifications Safety Advice, Operating Procedures & Maintenance Unpacking Your ICE Maker