Mellerware MA20050 Once you have finished using the appliance, Cleaning, Anomalies and repair

Models: MA20050

1 8
Download 8 pages 60.13 Kb
Page 5
Image 5
Once you have finished using the appliance:

going around the head.

-Leave the hair a little longer than the desired length as it can always be altered later.

-While working adapt the comb/comb guide to the desired length.

-At regular intervals, stop cutting in order to comb the hair and check the results so far.

Once you have finished using the appliance:

-Turn the appliance off, using the on/off switch.

-Unplug the appliance from the mains if it was con- nected to the mains.

-Return the appliance to the charger if used with battery power.

-Clean the appliance.

Cleaning:

- Disconnect the appliance from the mains and al- low it to cool before undertaking any cleaning task.

-Clean the device BODY with a damp cloth that has been administered a couple of drops of detergent. Dry afterwards.

-Do not use solvents, or products with an acid or base pH such as bleach, or abrasive products, for cleaning the appliance.

-Clean the blades and the comb guides with the cleaning brush. Remove the hairs form the blades and from within the appliance using the brush. It is important to clean off all the hairs after each use.

-If the appliance is not kept in a clean condition, its surface can deteriorate and badly affect the prod- uct’s shelf life, provoking a potentially dangerous situation.

Anomalies and repair

-Take the appliance to an authorised technical support service if problems arise. Do not try to dis- mantle or repair without assistance, as this may be dangerous.

-If the connection to the mains has been damaged, it must be replaced and you should proceed as you would in the case of damage.

Ecology and recyclability of the product

- The materials of which the packaging of this ap- pliance consists are included in a collection, clas- sification and recycling system. Should you wish to dispose of them, use the appropriate public con- tainers for each type of material.

-The product does not contain concentrations of substances that could be considered harmful to the environment.- This symbol means that; should you

wish to dispose of the product once its working life has ended, take it to an authorised waste agent for the selective collection of Waste from Electric and Electronic Appliances (WEEA).

-The product may include a battery or batteries; the user must remove them before disposing of the product. Remember that batteries must be dis- posed of in duly authorised containers. Do not dis- pose of them in fire.

How to remove the batteries from the inside of the appliance:

Warning: It’s important that the batteries are com- pletely de-charged before removing from the appli- ance.

To remove the batteries once the appliance life has come to an end, follow the instructions:

-Open the bottom outside casing of the appliance, removing the screw that keeps everything in posi- tion beforehand. Remove the blade, extracting the two screws that are located on the upper part of the bottom outside casing (Fig 2).

-Remove the upper casing of the appliance (Fig.

3).

-Locate the battery and cut the wires (red and black). To minimize the risk of short-circuiting the appliance with the possible residual battery charge, first cut the red wire and protect its conductive part with insulating tape. Next, cut the black wire in the same way (Fig 4).

-Safely remove the battery from where it is kept.

Characteristics:

-Degree of protection: IPX0

-Acoustic pressure level: < 60dB(A)

NB: These characteristics can be subject to change without prior warning, for the purpose of improve- ments made to this product.

This appliance complies with Directive 2006/95/EC on Low Voltage and Directive 2004/108/EC on Elec- tromagnetic Compatibility.

MA_20050_IM.indd 5

5/28/2010 11:46:33 AM

Page 5
Image 5
Mellerware MA20050 manual Once you have finished using the appliance, Cleaning, Anomalies and repair, Characteristics