Memorex M-Flyer quick start Disabling the ReadyBoost Feature, FAQs

Disabling the ReadyBoost™ Feature

1.Double-click the Computer icon on your desktop.

2.Right-click on the TRAVELDRIVE and select Properties (Fig 3).

3.Click the ReadyBoost tab and select the “Do not use this device” (Fig 4).

4.Click “OK” to proceed disabling the ReadyBoost feature.

Fig 3 Fig 4

FAQs

•Do all USB Flash Drives support the ReadyBoost feature under Windows Vista?

No. The USB Flash Drives MUST meet the minimum Random Read and Write speeds requirements to support the ReadyBoost feature.

•Can I format my TravelDrive while the ReadyBoost feature is enabled?

No. The ReadyBoost feature MUST be disabled prior to formatting your TravelDrive.

•Does ReadyBoost feature support multiple ReadyBoost capable USB Flash Drives?

No. Windows Vista allows only one drive at a time to be used for the Ready Boost feature.

•How do I know the ReadyBoost feature is working or enabled?

You can confirm that ReadyBoost feature has enabled by right clicking your TravelDrive and selecting Drive Properties (Fig 3). After Selecting the Ready Boost Tab, you can verify if “Use this device” item is shown as selected under “Speed up your system by utilizing the available space on this device” (Fig 4), then your ReadyBoost feature has been enabled and is functioning.

•How can I enable the ReadyBoost feature if I did not choose to enable it on the TravelDrive’s first insertion to Computer using Microsoft Windows Vista?

If you would like to enable the ReadyBoost feature, right click your Travel Drive and selecting Drive Properties (Fig 3). Under the ReadyBoost Tab,

select “Use this device” item shown under “Speed up your system by utilizing the available space on this device” (Fig 4), Select OK to

proceed enabling your ReadyBoost Feature.