MC1003.QXD 3/3/03 9:56 AM Page 9
POWER SOURCES
This CD player requires either eight (8) “C” cell batteries (not included) or a 9V AC adapter having a positive center.
BATTERY INSTALLATION
1. Make sure the unit is not on the
base. Open the battery compartment door by rotating the Battery knob clockwise, then lift
the battery compartment off. 2. Insert eight (8) “C” cell batteries
(not included) as shown in the illustration to the right. Alkaline batteries are recommended for the longest playing time.
3. Replace the battery compartment cover and rotate the Battery knob
|
|
|
|
| BATTERY PRECAUTIONS | |
Follow these precautions when using batteries in this device: | ||||||
1. | Use only the size and type of batteries specified. |
| ||||
2. | Be sure to follow the correct polarity when installing the batteries as indicated next to the battery | |||||
| compartment. Reversed batteries may cause damage to the device. | |||||
3. | Do not mix different types of batteries together (e.g. Alkaline and | |||||
| fresh ones. |
|
|
|
|
|
4. | If the device is not to be used for a long period of time, remove the batteries to prevent damage or | |||||
| injury from possible battery leakage. |
| ||||
5. | Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. | |||||
| (Follow battery manufacturer’s directions.) |
| ||||
|
|
|
|
|
| |
AC OPERATION – |
|
|
| + |
| |
|
|
| ||||
To operate the unit using AC power, connect an adapter with an input of 120V, 60Hz and an output of 9V DC, 500mA (adapter not included) to an AC outlet having 120V, 60Hz AC only. Plug the small end into the DC 9V jack on the unit and connect the other end into the AC outlet. The batteries are automatically disconnected when the AC adapter is used.
CAUTION: When not using AC power, disconnect the AC adapter from the wall outlet by pulling the plug (not the cord). Do not touch the AC adapter with wet hands and plug fully inserted without exposing any part of the blade. Do not use an AC adapter near water.
9
