10
EN
11
EN

LCD Monitor Information

The indicator shown below may display on LCD when videos and photos are recorded:
(1)
Video Resolution
HD (1280 x 720, 30fps)
VGA (640 x 480, 30fps)
Photo Resolution
2592 x 1944 (5MP)
(2)
Macro Position Focusing
Normal Mode
(3) Stabilization
(4)
1350
Number of photos that can still be taken.
01:28:0601:28:06
Recording time of video that can still be taken at current resolution
00:00:12
00:00:12
Recording time of video during video recording
(5)
Battery: full power
Battery: medium power
Battery: low power
Battery: power empty
(6)
Zoom meter:
1X~3X (3X Digital zoom)
Exposure compensation value

Video Recording

Press Left/Right Buttons ( / ) repeatedly until the Video Recording icon ( / ) is displayed on
the screen. When the desired resolution is selected, the icon will appear in the center of LCD around
2 seconds then move to the right-top corner.
Two resolution settings are available:
Video Quality
HD (1280 x 720, 30fps)
VGA (640 x 480, 30fps)
Press Record/Enter Button ( ) to take videos. When a video is recording, a time indicator will
display on LCD monitor. Press Record/Enter Button ( ) again to stop.
Press Playback Button () to switch to Playback Mode. Press Left/Right Buttons ( / ) to view the
previous/next video/photo. Press Playback Button ( ) to play/pause recorded video.

Photo Recording

Press Left/Right Buttons ( / ) repeatedly until the Photo Recording icon ( ) is displayed in the
center of LCD around 2 seconds then move to the right-top corner.
Press Record/Enter Button ( ) to capture image.
Press Playback Button () to switch to Playback Mode. Press Left/Right Buttons ( / ) to view
the previous/next video/photo.
Image Quality
2592 x 1944 (5MP)

Using Macro Function

Slide the macro switch to change the focus range for different distances of objects.
To take close-up videos/photos:
Slide the macro switch to Macro (1. ) for object located at about 20 cm.
Press 2. Record/Enter Button ( ) to take videos/photos.
In Macro Mode, the macro icon ( ) will appear in the center of LCD around 2 seconds.

Note: Remember to turn the macro switch back to Normal ( ) when you are not taking close-

up videos/photos.

Using Exposure Function

Adjust the exposure value to change the amount of light that the camcorder will receive when taking
videos/photos or while in Preview Mode.
To adjust the exposure value:
Use Increa1. se/Decrease Buttons ( ) to adjust preferred EV (Exposure Value). The exposure bar
will automatically disappear after 2 seconds.
Press 2. Record/Enter Button ( ) to take videos/photos.