CD OPERATION
TO PLAY A CD (Standard, CD-R and CD-RW)
1 |
2 |
Open the CD compartment lid by sliding the CD OPEN switch to the right. Gently press a disc, label side up, onto the spindle until it locks in place. Close the CD compartment lid. Insert headphones into the PHONES jack.
While the unit is off, press the
PLAY/PAUSE (
)/POWER ON button to start playback. To pause PLAYBACK,
press the PLAY/PAUSE (
)/POWER ON button again, the display will blink. Press once again to resume playback.
3 | 4 |
| 3 |
| 1 |
| 2 |
4 |
Adjust the VOLUME control ❶ and DBBS switch ❷ as desired. To skip forward or backward through the tracks on the disc, press the SKIP/SEARCH
❸ or 
❹ button. To search
forward or backward through the tracks on the disc, press and hold the
SKIP/SEARCH 
❸ or 
❹ button.
When the disc is through playing, it will stop. Press the STOP (■)/POWER OFF button to stop the disc before it is finished; the total number of tracks will appear. Press the STOP (■)/POWER OFF button again while in the stop mode to turn the unit off or wait approximately 60 seconds and the unit will automatically turn off.
NOTES:
•This unit is capable of playing standard CDs or 3” singles; no adapter is required.
•If a disc is inserted incorrectly, dirty, damaged or not present at all, the display will show “no disc”.
•As each track is played, the track number and elapsed time are shown in the display.
•To remove the disc, open the CD compartment, hold the edge of the CD, gently press the center pivot and lift the CD.
•The maximum time of a CD is 74 minutes for this unit.
•“- - -
7
