CD OPERATION
TO PLAY A CD (Standard, CD-R and CD-RW)
1 |
| 2 |
| 1 | 2 |
|
|
Open the CD compartment lid by sliding the CD OPEN switch 1 to the right. Gently press a disc, label side up, onto the spindle until it locks in place. Close the CD compartment lid. Insert headphones into the PHONES jack. Slide the FUNCTION switch 2 to the CD position.
Press the PLAY/PAUSE (®p)/POWER ON button to start playback. To pause playback, press the PLAY/PAUSE (®p)/POWER ON button again, the elapsed time will blink. Press once again to resume playback.
3 | 4 |
| 3 |
| 1 |
| 2 |
4 |
Adjust the VOLUME control 1 and DBBS switch 2 as desired. To skip forward or backward through the tracks on the disc, press the
Skip/Search/Tuning | 3 or | 4 |
button. To search forward or backward through the tracks on the disc, press
and hold the Skip/Search/Tuning 3 or 
4 button.
When the disc is through playing, it will stop. Press the STOP (■)/POWER OFF button to stop the disc before it is finished; the total number of tracks will appear. Press the STOP (■)/POWER OFF button again while in the stop mode to turn the unit off or wait approximately 60 seconds and the unit will automatically turn off.
9
