5
REMOTE CONTROL
REMOTE BATTERYINSTALLATION
BATTERYPRECAUTIONS
Follow these precautions when using a battery in this device:
1. Use only the size and type of battery specified.
2. Be sure to follow the correct polarity when installing the battery as
indicated in the Battery Compartment. Areversed battery may cause
damage to the device.
3. If the device is not to be used for a long period of time, remove the
battery to prevent damage or injury from possible battery leakage.
4. Do not try to recharge a battery not intended to be recharged; it can
overheat and rupture. (Follow battery manufacturer’sdirections.)
1. Remove the Battery Compartment by
pressing in on the tab and then sliding the
compartment out.
2. Install a CR2025 battery, by popping it in
through the back of the compartment,
paying attention to the polarity diagram in
the compartment (positive side up).
3. Replace the Battery Compartment.
EFFECTIVE DISTANCE OF THE REMOTE CONTROLTRANSMITTER

20ft

30 30

NOTES:
• When there is an obstacle between
the unit and the transmitter, the
transmitter may not operate.
• When direct sunlight, an
incandescent lamp, fluorescent
lamp or any other strong light
shines on the RemoteSensor of
the unit, the remote operation may
be unstable.