MKS5012.O/M.QXD 7/15/02 7:00 AM Page 11
OPERATION (CONTINUED)
TO PROGRAM THE MEMORY
The CD player in this unit has a 30 track programmable memory that allows you to program up to 30 tracks on any disc for playback in any desired order. You may program 30 different tracks or you may also program certain tracks to play more than once.
To perform programmed playback, proceed as follows
1 |
Slide the FUNCTION switch to the CDG position. Insert a CD as described in the TO INSERT A CD section on page 8.
2 | 3 |
|
| 1 | 2 |
Press the PROGRAM button; the | Use the SKIP/Search |
| ❶ or | |
| ||||
| ||||
PROGRAM indicator will blink |
| ❷ button to select the first | ||
| ||||
| ||||
and the display will show “01”. | track to be programmed. |
|
|
4 |
Press the PROGRAM button again; the selected track has now been programmed.
5 |
|
1 | 2 |
Repeat steps 3 and 4 to program the other desired tracks in sequence.
6 |
Press the PLAY/PAUSE (❿/ ) button to begin playback; the Program indicator will light and the tracks will play in the order programmed.
NOTES:
•Programming is the ability to preselect the order in which a series of tracks will be played.
•Each track may be stored in the program memory as many times as desired.
•As each track is played, its track number will be displayed. You can move forward or backward through
the programmed tracks with the SKIP/Search or button.
•The CD player will stop after all programmed tracks have been played or the STOP (■) button is pressed.
•When the program is full, the display will show “Fu”.