MKS8502.IT.O/M.QXD 7/17/03 9:44 AM Page 14
OPERATION (CONTINUED)
USING THE BUILT-IN CAMERA
1 |
2 |
3 |
Rotate the MONITOR switch to the CAMERA position.
When connected to an external TV, slide the CDG/CAMERA switch to the CAMERA position to see the image from the camera on the external TV.
Open the camera compartment. The camera will then show the image on the
Rotate the Camera Focus Adjusting Ring located on the outside of the lens to adjust the camera’s focus.
NOTE: When the MONITOR switch is in the CAMERA position, you can still playback a CD.
ADJUSTING THE PICTURE
When watching a CD+G on the monitor screen, adjust the brightness,
|
| CONTRAST |
| BRIGHTNESS |
|
|
|
|
|
|
|
|
|
|
If the picture moves up and down or rolls, rotate to adjust the vertical hold.
If the picture is too strong or too weak, rotate to adjust the contrast and clearly define the shades of blacks, grays and whites.
If the picture is too light or too dark, rotate to adjust the brightness.
14
