MP3126.OM.QXD 5/5/03 10:11 AM Page 12
CARE AND MAINTENANCE
SAFEGUARD AGAINST ACCIDENTAL ERASURE
When a new recording is made, any program |
| |
material previously recorded is automatically | ||
erased and only the new recording remains. To | ||
safeguard valuable recordings from being erased | ||
accidentally, the cassette and the deck are | ||
equipped with a special device. | ||
On the back of the cassette there is an erase | ||
prevention tab on each side. To prevent | ||
accidental erasing, break out these tabs with a | ||
screwdriver. If only one side of the tape is to be | ||
protected, break out the tab on the left side with | ||
the side desired facing you. |
|
|
To record on a tape in which the tab has been |
|
|
broken, place a piece of adhesive tape over that |
|
|
area. |
| |
|
| |
NOTE: When a tab is broken out, the record |
| |
button cannot be depressed. |
|
|
CASSETTE TAPE RECOMMENDATIONS
Standard tape lengths have 15
If there is any slack in the tape in the cassette, it should be removed before inserting the cassette. Place a pencil in one of the hubs and rotate clockwise until all slack is taken up.
12