MP3207.O/M.QXD 3/26/03 10:20 AM Page 14
CARE AND MAINTENANCE
Caring for Compact Discs
•Treat the compact disc carefully. Handle the compact disc only by its edges. Never allow your fingers to come in contact with the shiny, unprinted side of the compact disc.
•Do not attach adhesive tape, stickers, etc. to the compact disc label.
•Clean the compact disc periodically with a soft,
•If a compact disc skips or gets stuck on a section of the compact disc, it is probably dirty or damaged (scratched).
•When cleaning the compact disc, wipe in straight lines from the center of the compact disc to the outer edge of the compact disc. Never wipe in circular motions.
•This unit is designed to play only compact discs bearing the identification logo as shown here. Other compact discs may not conform to the CD standard and may not play properly.
B
E
N
ZENE
C
L
E
ANER
•Compact discs should be stored in their cases after each use to avoid damage.
•Do not expose compact discs to direct sunlight, high humidity, high temperatures, or dust, etc. Prolonged exposure or extreme temperatures can warp the compact disc.
•Do not stick or write anything on either side of the compact disc. Sharp writing instruments, or the ink may damage the surface.
•To prevent fire or shock hazard, disconnect yourunit from theAC power source when cleaning.
•The finish on your unit may becleanedwith a dust cloth and cared for as other furniture. Use caution when cleaning and wiping the plastic parts.
•Mild soap and a damp cloth may be used on the front panel.
•Periodic cleaning of the tape heads, capstan and pinch roller is necessary to maintain good sound
reproduction. Clean them after every 100 hours of use or less if playback has deteriorated. Use a cotton swab moistened with head cleaning solutionor isopropyl alcohol,thenwipe dry with another swab.Cleaning the unit
NOTE: Never use metal objects on or near the tape heads. Do not allow any cleaning material to fall into the tape assembly.
14
