MP3823 O/M.QXD 4/30/02 10:57 AM Page 11
CARE AND MAINTENANCE
SAFEGUARD AGAINST ACCIDENTAL ERASURE When a new recording is made, any program material previously recorded is automatically
| Tab |
|
erased and only the new recording remains. To | Tabforside2 |
|
safeguard valuable recordings from being erased |
| |
accidentally, the cassette and the deck are |
| |
equipped with a special device. |
| |
On the back of the cassette there is an erase | Breakoutthetab | |
prevention tab on each side. To prevent |
| Tabforside1 |
accidental erasing, break out these tabs with a |
| |
screwdriver. If only one side of the tape is to be |
| |
protected, break out the tab on the left side with |
| |
the side desired facing you. |
|
|
To record on a tape in which the tab has been |
|
|
broken, place a piece of adhesive tape over that |
| Coverwithtapetorecordagain |
area. |
| topreventrecording |
NOTE: When a tab is broken out, the record |
| |
button cannot be depressed. |
|
|
CASSETTE TAPE RECOMMENDATIONS
Standard tape lengths have 15
If there is any slack in the cassette, it should be removed before inserting the cassette. Place a pencil in one of the hubs and rotate it clockwise until all slack is taken up.
11