Memorex MPD8860 manual Radio Operation, To Listen to the Radio

		RADIO OPERATION
TO LISTEN TO THE RADIO			2
1	2			3
				2
		1	1
Set the VOLUME control 1 to minimum			Slide the FUNCTION switch 1 to the RADIO
and plug the headphones into the			position. Press the MENU/ESP/BAND
PHONES jack. Press the PLAY/PAUSE			button 2 to select a band (AM or FM). If
(®p)/POWER ON button		2 to turn the	listening to FM, press the MODE/√ button
unit on.			3 to select Stereo or Mono.
3			4	3
	1
		2
				1
				2
Press and release the Skip/TUNING o			Adjust the VOLUME control 1 and DBBS
1 or n 2 button to tune a station. Press			switch	2 as desired. If FM STEREO
and hold the Skip/TUNING o 1 or n 2			reception is weak/noisy, press the
button for rapid search tuning.			MODE/√ button 3 to select Mono, in this
5			case the reception will be monaural.
			ANTENNAS
			AM–This unit has a built-in ferrite bar
			antenna, which provides adequate reception
			in most areas. If reception is weak, turn the
			unit to improve reception.
			FM–The headphones act as an antenna for
			FM. Extend the headphone wire for best FM
To turn the radio off, press the STOP			reception.
			AUTO SCAN
(■)/POWER OFF button.
			Press and hold the Skip/TUNING o or n
			button for approximately 1 second and the
			unit will automatically search for the next
			available station.

7