Memorex MPH6935 owner manual Memory Editing, Editing a stored name and/or phone number

MPH6935_OM Eng 3/12/02 3:07 PM Page 23

Memory Editing

Editing a stored name and/or phone number

1 Press and hold MEMORY until a tone sounds and “Memory Store” is displayed.

2 Press the ▲ or ▼ keys or number keypad to select the memory location you would like to edit.

3 Press SELECT.

The following screen appears with the memory location number that you have selected in

the display.

For example, if you selected memory location number 1, the display shows memory 1 selected.

4 Press the ▲ or ▼ key to select "Edit Memory", then press SELECT.

The following screen appears. The cursor flashes indicating that the display is ready for the name to be edited.

When a name has not been stored, the cursor appears at the beginning of the second line.

5 Press the number keys, #/s, */t/TONE, or DELETE/CHANNEL to edit the name. (See page 19.) To edit only the phone number, skip this step.

6 Press SELECT.

The following screen appears. The cursor flashes indicating that the display is ready for the number to be edited.

7 Use the number keypad, #/s, */t/TONE, REDIAL/PAUSE or DELETE/CHANNEL key to edit the phone number. The phone number cannot exceed 20 digits. (See page 19.)

When the phone number is not to be edited, skip this step.

8 Press SELECT.

The handset beeps and displays the confirmation screen. The memory storage is complete.

For example if you store a name and number into memory location number 1, the display shows

“Memory 1 Stored”.

After about 2 seconds, “Memory Store” is displayed.

9 Press OFF to return to standby.

23