OPERATION (CONTINUED)
TO PROGRAM THE MEMORY (UP TO 20 TRACKS)
1 |
1 |
2 |
2 |
3 |
|
2 | 1 |
|
Press the POWER button ❶ to turn the unit on. Press the FUNCTION button ❷ until CD is selected. Insert a CD as described on page 7.
Press the PROG button, the MEM indicator will blink.
Use the Skip/Search 
❶ or 
❷button to select the first track to be programmed.
4 |
5
3
4
6 |
Press the PROG button again; the selected track has now been programmed and counted as program 1.
Repeat steps 3 and 4 to program the other desired tracks in sequence (up to 20 tracks).
Press the Play/Pause (❿ / 
) button to begin playback; the MEM indicator will light and the tracks will play in the order programmed.
NOTES:
•Programming is the ability to preselect the order in which a series of tracks will be played.
•Each track may be stored in the program memory as many times as desired (up to 20 tracks).
•As each track is played, its track number will be displayed. You can move forward or backward through
the programmed tracks with the Skip/Search 
or 
button.
•The CD player will stop after all programmed tracks have been played or the Stop (■) button is pressed. If the Stop (■) button was pressed, the programmed tracks will remain in memory. Simply press the PROGRAM button and then the Play/Pause (❿/
) button to continue Program playback.
•To cancel Program playback, open the CD door or press the press the Stop (■) button twice.
HEADPHONES:
For private listening, connect low impedance 3.5mm (32 ohm) stereo headphones (not included) to this jack. The speakers are automatically disconnected when the headphone plug is inserted in the jack.
9
