Memorex MT1134 To Memorize Channels, Troubleshooting Guide, Adjusting Picture, Specifications

TO MEMORIZE CHANNELS

This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels.

Before selecting channels, they must be programmed into the TV's memory. In addition to normal VHF and UHF channels, this TV can receive up to 113 Cable TV channels. To use this TV with an antenna, set the TV/CATV menu option to the TV setting. When shipped from the factory, this menu option is in the CATV setting.

TV/CATV SELECTION

1	Press the MENU button.	￿MENU
			CH SETUP
2	Press the SET + or – button until the indicator next to "CH SETUP"		PICTURE
	begins to flash, then press the ENTER button.		LANGUAGE
			V-CHIP SET
3	Press the SET + or – button until the indicator next to "TV/CATV"	+ / – / ENTER / MENU ￿
	begins to flash.		TV CATV
4	Press the ENTER button to select the TV or CATV mode. The arrow		AUTO CH MEMORY
	indicates the selected mode.		ADD / DELETE
5	Press the MENU button twice to return to normal TV viewing.	〈 + / – / ENTER / MENU 〉

The chart below is typical of many cable system channel allocations.

CATV CHART

TV/AV SELECTION

If you connect the TV to a VCR, camcorder or TV game, through the audio/video in jacks, use the TV/ AV button to make your selection.

Press the TV/AV button repeatedly to select the desired mode.

"AUX" will display on the screen for 4 seconds.

AUX

1. To connect the TV to a VCR

VCRFront￿￿￿￿￿ ￿￿￿￿￿of￿￿￿￿￿￿￿TV￿￿

To Audio/
Video OUT VIDEO	AUDIO
(not supplied)

2.To connect the TV to a TV Game

The TV can also be used as a display device for many video games. However, due to the wide variety of different types of signal generated by these devices and subsequent hook-up variations required, they have not all been included in the suggested connection diagrams. You'll need to consult each component's Owner's Manual for additional information.

To Audio/Video OUT	Front￿￿￿￿￿￿￿o￿￿￿￿￿f￿￿ TV
TV GAME	￿￿￿￿￿

(not supplied)

3.To connect the TV to a camcorder

To playback from the camcorder, connect the camcorder to the TV as shown.

To AV OUT		￿￿￿￿￿￿￿￿￿￿￿￿￿￿
	Front of TV
jack	￿￿￿￿￿

Number on this TV									14	15	16	17	18	19	20	21	22
Corresponding CATV channel									A	B	C	D	E	F	G	H	I
23	24	25	26	27	28	29	30	31	32	33	34	35	36	37	38	39	40
J K L M N O P Q R									S T U V W AA BB CC DD
41	42	43	44	45	46	47	48	49	50	51	52	53	54	55	56	57	58
EE	FF	GG	HH	II	JJ	KK	LL	MM	NN	OO	PP	QQ	RR	SS	TT	UU	VV
59	60	61	62	63	64	65	66	67	68	69	70	71	72	73	74	75	76
WW AAA BBB CCC DDD EEE						FFF GGG HHH			III	JJJ	KKK	LLL	MMM NNN OOO PPP QQQ
77	78	79	80	81	82	83	84	85	86	87	88	89	90	91	92	93	94
RRR SSS		TTT UUU VVV WWW XXX YYY						ZZZ	86	87	88	89	90	91	92	93	94
95	96	97	98	99	100	101	102	103	104	105	106	107	108	109	110	111	112
A-5 A-4		A-3 A-2		A-1	100	101	102	103	104	105	106	107	108	109	110	111	112
113	114	115	116	117	118	119	120	121	122	123	124	125	01
113	114	115	116	117	118	119	120	121	122	123	124	125	5A

NOTE:

Contact your cable company to determine the type of cable system used in your area.

TROUBLESHOOTING GUIDE (not supplied)

Before requesting service, please refer to the following chart for the symptom and possible solution.

SYMPTOMS	POSSIBLE SOLUTIONS
	• Make sure the power cord is plugged in.
TV does not operate.	• Try another AC outlet.
	• Power is off, check fuse or circuit breaker.
	• Unplug unit for an hour, then plug it back in.
	• Station or CATV experiencing problems, tune to another station.
Poor sound or No sound.	• Check sound adjustments (VOLUME and MUTE).
	• Check for sources of possible interference.
	• Station or CATV experiencing problems, tune to another station.
Poor picture or No picture.	• Make sure channels are set into memory.
	• Check antenna or CATV connections, adjust antenna.
	• Check for sources of possible interference.

AUTOMATIC CHANNEL MEMORY

	1	Press the MENU button.
2	Press the SET + or – button until the indicator next to "CH SETUP"
		begins to flash, then press the ENTER button.
3	Press the SET + or – button until the indicator next to "AUTO CH
		MEMORY" begins to flash, then press the ENTER button. The TV will
		begin memorizing all the channels available in your area. Channel
		numbers will remain red until auto memorizing is complete.
4	Press the MENU button twice to return to normal TV viewing.
TO ADD/DELETE CHANNELS
	1	Press the MENU button.
2	Press the SET + or – button until the indicator next to "CH SETUP"
		begins to flash, then press the ENTER button.
3	Press the SET + or – button until the indicator next to "ADD/
		DELETE" begins to flash, then press the ENTER button.
4	Select the desired channels to be added or deleted using the Direct
		Channel Selection buttons (10 keys. 0-9), the CH	or	button
		or the SET + or – button.

5 Press the ENTER button to select ADD or DELETE.

If an unmemorized channel was selected (step 4), the channel indicator will be red. Press the ENTER button if you wish to ADD the unmemorized channel. The channel indicator will change from red to green when a channel is added and the channel will be memorized. If a memorized channel was selected (step 4), the channel indicator will be green.

Press the ENTER button if you wish to DELETE the channel from memory. The channel indicator will change from green to red when a channel is deleted.

Repeat steps 4 and 5 for each channel to be added or deleted.

￿MENU

CH SETUP

PICTURE

LANGUAGE

V-CHIP SET

+/ – / ENTER / MENU ￿

TV CATV

AUTO CH MEMORY

ADD / DELETE

〈+ / – / ENTER / MENU 〉

￿MENU

CH SETUP

PICTURE

LANGUAGE

V-CHIP SET

+/ – / ENTER / MENU ￿

TV CATV

￿￿￿ AUTO CH MEMORY￿￿￿￿￿

ADD / DELETE

〈 + / – / ENTER / MENU 〉

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

	• Check picture control adjustments.
Poor reception on some	• Station or CATV experiencing problems, tune to another station.
	• Make sure channels are set into memory.
channels.	• Station is weak, adjust antenna to receive desired station.
	• Check for sources of possible interference.
	• Station or CATV experiencing problems, tune to another station.
Poor color or no color.	• Make sure channels are set into memory.
	• Check picture control adjustments.
	• Check antenna or CATV connections, adjust antenna.
	• Check for sources of possible interference.
	• Station or CATV experiencing problems, tune to another station.
Picture wobbles or drifts.	• Make sure channels are set into memory.
	• CATV company is scrambling signal.
	• Adjust antenna.
No CATV reception.	• Check all CATV connections.
	• Set TV/CATV menu option to the CATV mode.
	• Station or CATV system problems, try another station.
Horizontal or diagonal bars	• Check antenna connections, adjust or re-direct antenna.
on screen.	• Check for sources of possible interference.
No reception above	• Make sure TV/CATV menu option is in the appropriate mode.
channel 13.	• If using antenna, check UHF antenna connections.
	• Batteries are weak, dead or inserted incorrectly.
No Remote operation.	• Remote is out of range, move closer to TV (within 15 feet).
	• Make sure Remote is aimed at sensor.
	• Confirm there are no obstructions between the Remote and the TV.
	• Make sure the power cord is plugged in.
	• No broadcast on station tuned.
TV shuts off.	• Sleep Timer is set.
	• Power interrupted.
Closed - Caption is not	• TV station experiencing problems or program tuned is not closed captioned.
	Try another channel.
activated.	• Check CATV connection or VHF/UHF antenna, reposition or rotate antenna.
	• Press TV/CAP/TEXT button to turn on the closed caption decoder.
Display is not shown in	• Select proper language in the menu options.
your language.

DEGAUSSING SYSTEM

This television has a degaussing circuit that will clear up color distortions on the TV screen that are caused by any excess magnetism which happens to get too close to the TV. This circuit is designed to operate once when the set is first plugged in. If minor color distortions

6 Press the MENU button three times after adding or deleting all of the desired channels, to return to normal TV viewing.

ADJUSTING PICTURE

You can adjust the settings for color, sharpness, contrast, brightness and tint.

1 Press the MENU button.

2 Press the SET + or – button until the indicator next to "PICTURE" begins to flash, then press the ENTER button.

3 Press the ENTER button repeatedly to select the item you want to adjust.

		BRIGHTNESS	CONTRAST COLOR		TINT	SHARPNESS
4	Press the SET + or –		button to adjust the setting.
				+		–
		BRIGHTNESS		increase brightness	decrease brightness
		CONTRAST		increase contrast	decrease contrast
		COLOR		be brilliant color	be pale color
		TINT		be greenish color	be reddish color
		SHARPNESS		makes picture	makes picture softer
				clearer

TO RETURN TO INITIAL SETTING

Press the RESET button while the picture adjusting mode appears on-screen.

CONNECTION TO OTHER EQUIPMENT

The exact arrangement you use to interconnect various video and audio components to the TV is dependent on the model and features of each component. Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs.

The connection diagrams below are offered as suggestions. You may need to modify them to accommodate your particular assortment of components. The diagrams are intended to show component video and audio interconnections only.

are seen in some locations on the screen, please unplug the TV for approximately 15 minutes. When the TV is plugged back in, the degaussing circuit will operate once to clear up any color distortions. Repeat this procedure any time the TV screen is accidentally magnetized, or when the TV is moved or relocated.

SPECIFICATIONS

Model		MT1134	MT1194
AC Power Input:	120V, 60Hz
AC Power Consumption:	54 Watts		73 Watts
Chassis Construction:	IC Solid state
Picture Tube:	13" (measured diagonally)		19" (measured diagonally)
Horizontal resolution:	260 lines
Audio Power Output Rating:	1.0 Watts		1.5 Watts
Speaker:	3" Full Range, 8 ohm
Tuner Type:	181 Channel, Quartz PLL Frequency Synthesized
Remote Control:	Infrared, Direct Access, 2 x AAA batteries (not supplied)
	VHF	2-13
	UHF	14-69
	CATV	01-97 (5A)-(A-3)
Receiving Channels:		98-99 (A-2)-(A-1)
		14-22 (A)-(I)
		23-36 (J)-(W)
		37-65 (AA)-(FFF)
		66-125 (GGG)-(125)
Antenna Input Impedance:	75 Ohm (VHF/UHF/CATV) Coaxial Input
Input:	Video: 1.0 Vp-p 75 ohm
	Audio: 300 mV, 47k ohm
Dimensions:	14-1/4" (W) x 14-3/16" (D) x		19-3/16" (W) x 18-5/16" (D) x
	12-5/8" (H)		16-3/8" (H)
Weight:	20.9 Ibs		38.6 Ibs

ACCESSORIES

Remote Control

Telescopic Antenna (MT1134 only)

3R00601A E 5 4/1/04, 8:56 PM