MTT3200 O/M.QXD 2/28/03 9:22 AM Page 7
COMPACT DISC (CD) OPERATION (CONTINUED)
TO PROGRAM THE MEMORY (UP TO 30 TRACKS)
1 |
|
2 | 1 |
2 |
3 |
|
1 | 2 |
Slide the FUNCTION switch ❶ to the CD position and press the CD Open/Close button ❷. Place a CD on the center spindle, with the printed label side facing up. Press the CD Open/Close button ❷ again to close the CD compartment door.
Press the PROG button; “01” will |
| Use the SKIP/Search |
| ❶ or | |
| |||||
| |||||
appear in the display and the |
|
| ❷ button to select the first | ||
| |||||
| |||||
Program indicator will blink. |
| track to be programmed. |
|
| |
|
|
|
|
|
|
4 |
5 |
|
1 | 2 |
6 |
Press the PROG button again; the selected track has now been programmed and counted as program 1.
Repeat steps 3 and 4 to program the other desired tracks in sequence (up to 30 tracks).
Press the PLAY/PAUSE ( / ) button to begin playback; the Program indicator will light and the tracks will play in the order programmed.
NOTES:
•Programming is the ability to preselect the order in which a series of tracks will be played.
•Each track may be stored in the program memory as many times as desired (up to 30 tracks).
•If you attempt to program in more than 30 tracks, the display will show “Fu” (Full).
•As each track is played, its track number will be displayed. You can move forward or backward through
the programmed tracks with the SKIP/Search or button.
•The CD player will stop after all programmed tracks have been played or the STOP (■) button is pressed.
• To playback the program again, press the PROG button, then press the PLAY/PAUSE ( /) button.
•To clear the program memory, press the STOP (■) button while in the Stop mode.
7