57
Temporary disabling of rating level by DVD disc
1Load a DVD disc and press
PLAY or OPEN/CLOSE (see
page 44).
2If the DVD disc has been designed to temporarily cancel the
rating level, the screen which follows the “Reading” screen will
change, depending on which disc is played. If you select “
YES” with pressing ENTER, “Your disc exceeds the parental
control level 1.” (e.g.) screen will then appear.
3If you wish to cancel the set rating level temporarily, select “
Parental Control Level” with or , then press ENTER. If
the 4-digits password at step 3 on page 55 has been set, the
password entering screen will appear as shown in step 4
below.
Alternatively, if the password has not been set, playback will
commence. If you don’t know (or have forgotten) the pass-
word, select “Cancel Picture”.
The setting screen will disappear. Press OPEN/CLOSE to
remove the disc.
4Enter the password with
Number buttons (0-9).
Then press ENTER.
• If you interrupt the entering,
press RETURN.
5Playback will commence if the entered password was correct.
Depending on the DVD disc, the disc
may try to temporarily cancel the
rating level that you have set.
It is up to you to decide whether to
cancel the rating level or not.
Your disc exceeds
the parental control level 1.
Parental Control Level
Cancel Picture
/Enter/Return
Please enter the
4digit password
9/
Cancel
/ReturnEnter/0
Reading
NOTE:
This temporary cancellation of the rating
level will be kept until the disc is ejected.
When the disc is ejected, the original
rating level will be set again automati-
cally.
5V40401A [En]55-60 2/3/06, 6:00 PM57