Memorex MX4501 manual Listening to the Radio, Automatic Tuning Press and hold the SKIP/TUNING o

LISTENING TO THE RADIO

Press the POWER button to turn the unit on; the display will light brightly.

Press the FUNCTION button repeatedly until the tuner is selected; "AM" or "FM" and the frequency will appear in the display.

Press the BAND button on the main unit or at the remote to select AM or FM.

1 2

MANUAL TUNING: Repeatedly press the SKIP/TUNING o 1 or n button to manually advance the

frequency2 in the display up or down until the desired frequency appears.

For FM , "ST" (Stereo indicator) will appear if the station is broadcasting in stereo.

1 2

AUTOMATIC TUNING: Press and hold the SKIP/TUNING o 1

or button until the frequency in then 2display starts to scan, and then release the button; the tuner will search and then stop on the next strong station it finds. Repeat this step until the desired frequency appears in the display.

2

1

Adjust the BASS BOOST button and VOLUME control as

desired1 .2

Hints for Better Reception

AM–The AM ferrite bar antenna is located inside the unit. It may be necessary to turn the unit slightly so that the internal antenna is pointing in the direction of the AM transmitter. You may have to experiment to find the position that provides the strongest reception for each of your favorite AM stations.

FM–Make sure that the FM Wire Antenna is extended to its full length. You may have to vary the direction of the antenna to find the strongest signal for each FM station.

NOTE:

When you turn the unit off and then back on again, the volume setting will return to the default setting level.

9