INSTALLATION INSTRUCTIONS

Place the SG Series Hot Dog Grill in the most convenient location for ease of cleaning, maintenance and general operation. When installing this unit, avoid locations with drafts, close proximity to grease or vapor-producing appliances or other high ambient heat equipment. Allow sufficient overhead clearance for heat dissipation. A minimum of 1” clearance is required on all sides for proper air circulation.

WARNING

This unit must be used with voltage

As specified on the unit data plate located on

the rear panel. Use of any other voltage, Or altering plug will damage unit, void The warranty, and may cause injury.

ELECTRICAL SPECIFICATIONS

The circuit on which the receptacle is installed must be of adequate wiring size and sufficient capacity to meet the requirements indicated on the unit data plate and in accordance with the National Electrical Code and local electrical installation codes.

OPERATION INSTRUCTIONS

WARNING

HOT SURFACES ARE PRESENT

USE CAUTION WHILE OPERATING THIS UNIT

2

Page 2
Image 2
Merco Savory SG Series operation manual Installation Instructions, Electrical Specifications, Operation Instructions