Setting up the Stereo Power Amplifier

To connect to a conventional preamplifier

●Connect the sockets marked INPUT on the rear panel of the stereo power amplifier to the outputs from your preamplifier.

You should either use a twin-screened audio cable, or a pair of single-screened audio cables. These cables can have a considerable effect on the quality of the sound, and you are advised to seek your dealer’s advice on the best type of cables for your system.

To connect to a 501 Control Unit

501 Control Unit

555 Stereo Power Amplifier

 

 

 

 

 

OUTPUT

 

INPUT

INPUT

 

 

 

 

 

 

Audio lead

●Connect the sockets marked OUTPUT L and R on the rear panel of the 501 Control Unit to the INPUT sockets on the rear panel of the 555 Stereo Amplifier.

To connect to A2 Loudspeakers

A2 Loudspeaker

A2 Loudspeaker

555 Stereo Power Amplifier

●Use the links provided to bridge the BASS/MID and TWEETER terminals on the rear of each loudspeaker.

●Connect one of each pair of the red and black terminals on the rear panel of the 555 Stereo Power Amplifier to the red and black terminals on the A2 Loudspeakers.

10