PRECAUTIONS & WARNINGS

Your MESA/Boogie Amplifier is a professional instrument. Please treat it with respect and operate it properly.

USE COMMON SENSE AND ALWAYS OBSERVE THESE PRECAUTIONS: WARNING: EU: permission from the Supply Authority is needed before connection.

WARNING: Vacuum tube amplifiers generate heat. To insure proper ventilation always make certain there is at least four inches (100mm) of space behind the rear of the amplifier cabinet. Keep away from curtains or any flammable objects.

WARNING: Do not block any ventilation openings on the rear or top of the amplifier. Do not impede ventilation by placing objects on top of the amplifier which extend past the rear edge of its cabinet.

WARNING: Do not expose the amplifier to rain, moisture, dripping or splashing water. Do not place objects filled with liquids on or nearby the amplifier.

WARNING: Always make certain proper load is connected before operating the amplifier. Failure to do so could pose a shock hazard and may result in damage to the amplifier.

Do not expose amplifier to direct sunlight or extremely high temperatures.

Always insure that amplifier is properly grounded. Always unplug AC power cord before changing fuse or any tubes. When replacing fuse, use only same type and rating.

Avoid direct contact with heated tubes. Keep amplifier away from children.

Be sure to connect to an AC power supply that meets the power supply specifications listed on the rear of the unit. Remove the power plug from the AC mains socket if the unit is to be stored for an extended period of time. If there is any danger of lightning occurring nearby, remove the power plug from the wall socket in advance.

To avoid damaging your speakers and other playback equipment, turn off the power of all related equipment before

making the connections.

Do not use excessive force in handling control buttons, switches and controls. Do not use solvents such as benzene or paint thinner to clean the unit. Wipe off the exterior with soft cloth.

Be sure to have the warranty card filled out by the store at which it was purchased and return to Mesa/Boogie.

YOUR AMPLIFIER IS LOUD! EXPOSURE TO HIGH SOUND VOLUMES MAY CAUSE PERMANENT HEARING DAMAGE !

No user serviceable parts inside. Refer service to qualified personnel. Always unplug AC power before removing chassis. EXPORT MODELS: Always insure that unit is wired for proper voltage. Make certain grounding conforms with local standards.

READ AND FOLLOW INSTRUCTIONS OF PROPER USAGE.

Page 3 Page 5
Page 4
Image 4
Mesa/Boogie MARK 1 owner manual Precautions & Warnings
Page 3 Page 5

MARK 1 specifications

The Mesa/Boogie MARK 1 is an iconic guitar amplifier that has significantly influenced the world of music since its introduction in the late 1960s. Designed by Randall Smith, the MARK 1 was one of the earliest examples of a high-gain, boutique-style amplifier, aimed at offering guitarists a versatile tool for achieving rich tones across various genres.

One of the standout features of the MARK 1 is its innovative preamp design, which utilizes multiple gain stages to produce a wide range of tonal options. This allows players to achieve everything from sparkling clean sounds to aggressive, saturated overdrive. The two-channel configuration—clean and lead—enables users to switch effortlessly between different sounds, making it a favorite among performers looking for adaptability in their rig.

The MARK 1 is also equipped with a powerful EQ section, featuring a 5-band graphic equalizer that grants further control over tonal shaping. This level of customization is rare in amplifiers of its time, allowing musicians to tailor their sound to perfection, whether in the studio or on stage. The “Fat” switch adds additional low-end response and gain, enhancing the amp's overall character and making it suitable for heavier genres.

Another hallmark of the MARK 1 is its compact design, which was revolutionary at the time. Weighing significantly less than traditional tube amplifiers, the MARK 1 was constructed with portability in mind, making it easy for gigging musicians to transport. This combination of power and portability made the MARK 1 a popular choice for artists across various genres, from rock to blues and jazz.

The MARK 1, like many of Mesa/Boogie’s offerings, is built with high-quality components, ensuring durability and reliability. The use of premium tubes in the power section contributes to its dynamic response and harmonic richness, vital for expressive playing.

Overall, the Mesa/Boogie MARK 1 is more than just an amplifier; it's a landmark in guitar amplification technology. With its versatility, compactness, and powerful tone-shaping capabilities, the MARK 1 paved the way for future amplifiers and continues to be revered by musicians around the world for its outstanding performance and timeless sound. Whether performing live or recording in the studio, the MARK 1 remains a trusted companion for guitarists seeking to explore the full spectrum of their musical expression.
Top Page Image Contents