ENGLISH en
9. Accessories
Use only genuine Metabo accessories.
For a complete range of accessories, see
www.metabo.com or the main catalogue.
10. Repairs
Repairs to electrical tools must be carried out by qualified electricians ONLY!
If the mains connection cable of this machine is damaged, it must be replaced by the manufacturer or an authorized service centre to avoid hazard. Contact your local Metabo representative if you have Metabo power tools requiring repairs. For addresses see www.metabo.com.
You can download a list of spare parts from www.metabo.com.
11. Environmental Protection
Observe national regulations on environmentally compatible disposal and on the recycling of disused machines, packaging and accessories.
12. Technical Specifications
Explanatory notes on the specifications on page 3. | ||
Changes due to technological progress reserved. | ||
D | = Diameter of support plate | |
P1 | = | Nominal power input |
P | = | Power output |
n2 | = Idle speed (setting wheel) | |
0 | = Idle speed (TurboBoost switch) | |
n0, TB | ||
n1, TB | = Speed at rated load (TurboBoost | |
s0 |
| switch) |
= Oscillating frequency at idle speed | ||
s0, TB |
| (setting wheel) |
= Oscillating frequency at idle speed | ||
s1, TB |
| (TurboBoost switch) |
= Oscillating frequency at rated load | ||
S | = | (TurboBoost switch) |
Oscillating circuit diameter | ||
m | = Weight without mains cable | |
Wear ear protectors!
The technical specifications quoted are subject to tolerances (in compliance with the relevant valid standards).
7
