Metabo Hammer manual Wall Chasers

WALL CHASERS

COMMON FEATURES

Suitable for quick and clean cutting of wall chases Groove width adjustable

Spindle lock

Variably adjustable cutting depth Robust Metabo Marathon motor

Power-saving work through drawing cut from top to bottom

Adjustable additional handle Supplied with chase extraction chisel

Also suitable for cutting by using only one diamond cutting disc

Metabo winding protection grid Auto-stop carbon brushes

Extraction nozzle for all common suction hoses

MFE 30

MFX 65

METAL PROCESORS ANGLE GRINDERS

HAMMERS

	1400 Watt	2500 Watt
	Electronic	Wall Chaser
	Wall Chaser	MFX 65
	MFE 30
Special advantages
Tacho Constamatic (TC)
full-wave electronics
Starting current limitation
Electronic starting current
limitation
No-volt release switch
Roller under the motor
housing for exact machine
guiding
Rotatable handle without
tools
Metabo safety switch:
safety lock against
unintentional start
Overload protection
Metabo S-automatic torque
limiting clutch
Comparative
device characteristics
Torque	3,5 Nm	18 Nm
Diameter of cutting disc	125 mm	230 mm
Possible groove widths	10/17/23/30 mm	3/9/17/29/33/
		37/41 mm
Cutting depth adjustable	0 - 30 mm	20 - 65 mm
No load speed	8.200 /min	6.600 /min
Rated input power	1.400 W	2.500 W
Output power	750 W	1.770 W
Rated load speed	8.200 /min	4.500 /min
Weight (without mains cable)	3,9 kg	7,7 kg
Standard equipment	4 spacer rings,	7 spacer rings,
	adjusting nut,	adjusting nut,
	side handle, offset	side handle, span-
	screwdriver, span-	ner wrench, chase
	ner wrench, chase	extraction chisel,
	extraction chisel,	sheet steel carry
	sheet steel carry	case
	case
Typ	MFE 30	MFX 65
Bestell-Nr. Machine	6.01119.50	–
– with 2 diamond cutting discs
– without diamond cutting discs	6.0119	6.01225

Diamond cutting discs

Diameter	Segment	Maximum	Packing	Order
x bore	dimensions	speed	unit	no.
mm	mm	/min

"Flexiamant Laser", segmented cutting edge, for hard materials

Suitable for all hard materials such as concrete (even reinforced), concrete pipes, kerbstones, granite, hard sandstones, facing stones, exposed aggregate concrete

Quality of diamond and bond adjusted to highest requirements

Laser-welded diamond segments for optimum safety

Maximum working speed 80 m/s

125 x 22,23	40 x 2 x 7,5	12.200	1	6.24541
230 x 22,23	40 x 2,8 x 7,5	6.600	1	6.24544

"Flexiamant Laser", segmented cutting edge, for abrasive materials

For best cutting results in abrasive materials such as fresh concrete, sand-lime brick, sandstone

High-grade diamond quality in hard bond pro- vides for high cutting output and optimum tool life

Laser-welded diamond segments for optimum safety Maximum working speed 80 m/s

125 x 22,23	40 x 2 x 7,5	12.200	1	6.246411)
230 x 22,23	40 x 2,4 x 7,5	6.600	1	6.24644

1)Standard equipment with MFE 30 (Order no. 6.01119.50)

Accessories

	Order
	no.
Suction hose	6.30344
Connector Ø: 35/35 mm
Hose length: 4 m
Suction hose Ø: 35 mm

IMPACT DRILLS

DRILLS

WOOD SANDING MACHINESSCREWDRIVERS

ROUTERS AND PLANERS

83