Metra Electronics 95-7321 Double Din / Stacked Iso Din Head Unit Provision, Kit Assembly

95-7321KIT ASSEMBLY

DOUBLE DIN / STACKED ISO DIN

HEAD UNIT PROVISION

1Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation.

2Attach the Double DIN brackets to the inside edge of the Double DIN trim plate. (Figure A)

3Slide the Double DIN head unit or stacked ISO head units into the bracket/radio housing assembly and secure the Double DIN head unit or stacked ISO head units to the assembly using the screws supplied with the radio. (Figure B)

4Reassemble dash in reverse order of disassembly.

A

B

4