STACKED ISO MOUNT UNITS PROVISION
*Note: Refer also to the instructions included with the aftermarket radio.
NOTE: Mount the radio housing to the climate control assembly using the factory screws removed in step 4 of dash disassembly.
1Snap the Double DIN brackets to the inside edge of the Double DIN trim plate. (Figure A)
2Slide the stacked ISO units into the bracket/radio housing assembly and secure the units to the kit using the screws supplied with the units. (Figure B)
3Snap the Double DIN trim plate onto the front of the housing/radio assembly. (Figure B)
Continue to final assembly.
A
B
3
