Metra Electronics 95-8223S installation instructions Toyota Corolla

95-8223 DASH DISASSEMBLY

Toyota Corolla 2009-10

1Disconnect the negative battery ter- minal to prevent an accidental short circuit.

2Unclip and remove the (4) side trim panels from the right and left side of the radio and a/c controls. (Figure A)

3Unclip and remove the a/c vent panel above the factory radio.(Figure B)

4Remove (4) 10 MM bolts securing the radio. (Figure C)

5Remove (8) screws securing the brackets to the factory radio and remove the brackets. (Retain the brackets for re-use during kit assembly.) (Figure D)

6Remove (4) plastic clips from the back of the factory radio. (Retain the clips for re-use during kit assembly.)

A

B

Continue to kit assembly.

DC

REMOVE (4) SCREWS

FROM FACTORY BRACKET FROM EACH SIDE

1