Metra Electronics 98-8999 installation instructions Volkswagen Pocket, Knowledge is Power

98-8999POCKET ASSEMBLY

VOLKSWAGEN POCKET

1 Disconnect the negative battery
	A
terminal to prevent an accidental
short circuit.

2 Snap Pocket Trimplate VW (labeled TP-9008) onto the front of the Pocket. Locate the X-5599L Bracket and mount it to the “L” side of the Pocket with (3) #6 x 1/4" Phillips Flat Head Screws. Next locate the X-5599R Bracket and mount it to the “R” side of the

Pocket with (3) #6 x 1/4" Phillips B

Flat Head Screws. (Figure A)

3Pull out the plastic tray separating the dash cavity and remove the tray (“A”). Position the Pocket so each bracket is configured with (2) screws on the top and (1) screw on the bot- tom (“B”). Slide the pocket into the dash opening until the side clips engage. (Figure B)

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry.

Log onto www.installerinstitute.com or call

800-354-6782 for more information and take steps toward a better tomorrow.

1-800-221-0932 www.metraonline.com

REV. 08/12/08 © COPYRIGHT 2002-2008 METRA ELECTRONICS CORPORATION INST98-8999

3