FORD TAURUS 2004- 2007
ISO DIN HEAD UNIT PROVISION
1 Locate the factory wiring har- A ness in the dash. Metra recommends using the proper mating adapters (included) from Metra and AXXESS to integrate your new radio. Re- connect the negative battery terminal and test the unit for proper operation.
2Mount the ISO Brackets to the B head unit with the screws sup- plied with the unit. (Fig. A)
3Snap the pocket into the bot- tom opening of the radio hous- ing. (Fig. B)
4Slide the head unit into the ra- dio opening until the side clips engage. (Fig. B)
5Snap the Trim plate into the Radio Housing.
Continue to “Audio Wiring”....
FORD TAURUS 2004- 2007
DDIN/STACKED ISO DIN
HEAD UNIT PROVISION
1 | Locate the factory wiring har- | A |
|
| |||
| ness in the dash. Metra |
|
|
| recommends using the proper |
|
|
| mating adapters (included) |
|
|
| from Metra and AXXESS to |
|
|
| integrate your new radio. Re- |
|
|
| connect the negative battery |
|
|
| terminal and test the unit for |
|
|
2 | proper operation. |
|
|
|
| ||
Cut and remove the center |
|
| |
| bar from the radio housing. |
|
|
| (Fig.A) |
|
|
3 | Snap the Double DIN brack- |
|
|
| ets to the inside edge of the |
|
|
| Double DIN trim plate. |
|
|
4 | Slide the Double DIN head |
|
|
| unit or stacked ISO head units |
|
|
| into the bracket/radio housing |
|
|
| assembly and secure the Dou- |
|
|
| ble DIN head unit or stacked |
|
|
| ISO head units to the assem- |
|
|
| bly using the screws supplied |
| Continued on Pg. 6 |
| with the radio. (Fig. B) |
|
45
