99-5822B KIT ASSEMBLY
ISO MOUNT RADIO PROVISION WITH POCKET
| *Note: Refer also to the instructions included with the aftermarket radio. | |
1 | Cut and remove the top (2) mounting | A |
| holes off of the radio housing. |
|
| Note: The notch in the housing |
|
| should be on top. (Figure A) |
|
2 | Slide the included brackets onto the |
|
| sides of the radio housings pocket |
|
| from the back of the housing |
|
| forward. (Figure B) |
|
3 Mount the ISO Brackets to the head |
| |
| unit with the screws supplied with |
|
| the unit. (Figure C) |
|
|
| B |
4 | Slide the head unit into the radio |
|
| opening until the side clips engage. |
|
| (Figure D) |
|
5 | Snap the trim plate into the Radio |
|
| Housing. (Figure D) |
|
Continue to final assembly.
DC
5
