DOUBLE DIN OR
STACKED ISO MOUNT UNITS PROVISION
*Note: Refer also to the instructions included with the aftermarket radio.
1Cut and remove the center bar from the Radio Housing. (Figure A)
2Snap the Double DIN brackets to the inside edge of the Radio Housing.
(Figure B)
3Slide the Double DIN or stacked ISO mount units into the bracket/radio housing assembly then secure it to the assembly using the screws sup- plied with the Double DIN or ISO mount units. (Figure C)
4Snap the Double DIN Trim plate onto the front of the Radio Housing.
(Figure C)
A
B
Continue to final assembly.
C
5
