99-8223 KIT ASSEMBLY
ISO MOUNT RADIO WITH POCKET PROVISION
*Note: Refer also to the instructions included with the aftermarket radio.
A
1 Attach the clips removed from the fac- tory radio to the back of the radio housing trim plate. (Figure A)
2 Slide the Radio Housing Brackets onto the sides of the Radio Housing until the side clips engage. NOTE: Tabs are marked Left and Right. (Figure B)
3 Mount the ISO Brackets to the radio using the screws supplied with the radio. (Figure C)
4 Slide the radio into the radio housing | B |
until it snaps into place. (Figure D) |
|
5 Snap the Trim plate onto the front of |
|
the Radio Housing. (Figure D) |
|
Continue to final assembly. |
|
DC
3