Metra Electronics 99-9105 Double Din Radio Provision, Kit Assembly, Figure B, Figure D

99-9105KIT ASSEMBLY

DOUBLE DIN RADIO PROVISION

1Cut and remove center divider from radio housing. (Figure A)

2Snap the Double DIN brackets to the inside edge of the radio housing.

(Figure B)

3Slide the Double DIN radio into the Double DIN bracket/radio housing assembly and secure the unit to the kit using the screws supplied with the radio. (Figure C)

4Snap the Double DIN trim-plate onto the housing/radio assembly.

(Figure D)

Continue to final assembly.

A

B

DC

4