3
99-9224

KIT ASSEMBLY

DIN HEAD UNIT PROVISION
A
B
C
D
NOTE:Also refer to the instructions
included with the aftermarket radio.
Using a Phillips screw driver remove
the rear support bracket from the
radio housing.
(Figure A)
1
Snap the radio housing into the radio
bracket (removed from factory radio)
and replace rear support bracket.
(Figure B)
2
Slide the DIN cage into the radio
housing and secureby bending the
metal locking tabs outward.
(Figure C)
3
Slide the radio into the cage/ radio
housing assembly until it snaps into
place.
(Figure D)
4